ED721208
2.4
2.4.1
20
Connect the iTM plus adaptor to an AC power supply.
WARNING
cause an electric shock.
For safety reasons, power connection terminals are
covered with a protective cover. Remove this cover
before you start connecting the power supply. You
can do so by loosening a single screw using a Phil-
lips screwdriver. The terminal cover must be replaced
power supply.
the POWER section. Be sure to ground the ground terminal. Remember to secure the
power cables to the blue resin cable mount with cable ties when power connections are
made.
A
F
A
Cable mount
B
Earth leakage breaker
C
D
Earth
E
Secure cables with cable ties.
F
Location of cable mount
Installation Manual 3P291714-3
DCM601A52 iTM plus adaptor
E
Installation Manual
B
C
D
English
187
5