Daikin DCM601A51 Technical Data Manual page 94

Adaptor
KRP1BA54, B56, BA57, BA59
Accessories
NOTE
Installation differs according to models as shown below.
Do not bundle low and high voltage wires together.
Bundle any excess wires with the attached be wraps so as to keep loose wirings off the indoor unit PCB.
Ceiling-mounted cassette type
Note: Installation box for adaptor PCB is
FXF
(Multi-flow type)
Ceiling-suspended type
FHQ · FXH(Q)
90
Check if the following accessories are included in the kit.
Adaptor
× 1
•
Kits vary according to applicable models.
•
A special adaptor fixing plate and box are required for the following models.
...............................................................................
FXF–L
..................................................................
FXZQ, FXD(Q)
required to install the adaptor.
1.7 Adaptor for Wiring <KRP1B61 / KRP1BA54, B56, BA57, BA59 / KRP1C63, C64>
PCB support
Clamp
Installation manual
KRP1DA98
KRP1BA101
Ceiling-mounted cassette type
Ceiling-mounted Duct type
FXZQ Note: Installation box for adaptor PCB
(Compact Multi-flow type)
FXD(Q)
(Ceiling-mounted Duct type)
ED721208
× 4
× 3
× 1
is required to install the adaptor.