Cool/Heat/Auto/Fan Operation - Daikin BRC2E52C7 Operation Manual

Basic Operation Method

Cool/Heat/Auto/Fan Operation

Operation Method
1
28
2
3
28
4
28
Operation manual
13
• Press the Operation Mode Selector button several
times until the desired mode (Cooling, Heating, Fan
Only, Dry or Auto) is selected.
°C
Note
• Unavailable operation modes are not displayed.
• Only Cooling, Dry or Fan Only mode can be selected if the air
conditioner is a cooling-only model.
• Before making a mode change, make sure that Changeover
under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See
Heating Selection Eligibility" on page 19
under control icon blinks.
• Press the ON/OFF button.
The Operation lamp (green) will be lit and the air
conditioner will start operating.
• The set temperature will increase by 1°C
when the
decrease by 1°C when the
°C
is pressed.
Note
Temperature settings are not possible while in Dry or Fan Only
mode.
• To change the fan speed, press the Fan Speed
button.
°C
(SkyAir and VRV)
(Up) button is pressed and
(Down) button
"Setting the Cooling/
if the Changeover
BRC2E52C7 / BRC3E52C7
4P368042-1 - 2014.02