Canon imagePROGRAF iPF6400SE User Manual page 455

iPF6400SE
f OK button
Press this button on the Tab Selection screen to display the menu of the tab shown.
Pressing this button in menu items of each tab for which
menu item, enabling you to execute menu commands or set menu values.
Also press this button if the Display Screen indicates to press the OK button.
Back button
g
Displays the screen before the current screen.
Menu button
h
Displays the Tab Selection screen. (See "Menu Settings.")
Cut button
i
Pressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in Cutting
Mode in the Control Panel menu. (See "Specifying the Cutting Method for Rolls.")
j Feed button
Pressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper Manual-
ly.")
P.373
➔
Load button
k
Press this button when loading or replacing paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
l Cut Sheet lamp (green)
Lit when sheets are selected as the paper source.
m Roll Media lamp (green)
Lit when rolls are selected as the paper source.
Message Lamp (orange)
n
On
•
A warning message is displayed.
Flashing
•
An error message is displayed.
• Off
The printer is off or is operating normally.
o Data Lamp (green)
Flashing
•
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this
lamp flashes when the print job is paused or the printer is updating the firmware.
Off
•
There are no active print jobs when the Data lamp is off.
•
In Sleep mode, any button can be pressed except the Power button to recover from Sleep mode.
Note
User's Guide
is displayed at left will move to the lower level of the
P.474
➔
P.365
➔
P.388
➔
Control Panel
P.376
➔
455