iPF6400SE
Memory
Memory
Interface
Hi-Speed USB
Ethernet
Ink
For information on the ink the printer supports, see "Ink Tanks."
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying the
Paper Reference Guide.")
Paper width
Minimum paper length
Maximum printable
length ( *1 )
Thickness
Roll maximum outer diameter
Supported paper core inner diameter
Print area
*1: Varies depending on the operating system or application.
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.
Top Edge
Sheets
3 mm (0.12 in)
Rolls
0 or 3 mm (0 or 0.12
in)
User's Guide
Format
Mode
Connector
Format
Specification
Protocols
P.356
➔
For information on the paper widths the printer supports, see "Paper Sizes."
Rolls
Sheets
Top Paper Feed Slot
Rolls
Sheets
Top Paper Feed Slot
Rolls
Sheets
Top Paper Feed Slot
For details, see "Print Area."
➔
Printable Area
Bottom Edge
3 mm (0.12 in)
0 or 3 mm (0 or 0.12
in)
256 MB
Internal port
Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Series B (4-pin)
Internal port
IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3x Full Duplex
IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compatible),
HTTP, TCP/IP (IPv4/IPv6), AppleTalk
P.568
➔
203.2 mm (8.0 in)
279.4 mm (11.0 in)
18 m (19.7 yd)
1,600 mm (63.0 in)
0.07–0.8 mm (0.0028–0.031 in)
0.07–0.8 mm (0.0028–0.031 in)
150 mm (6 in) or shorter
2 inches / 3 inches
P.661
Sides
Top Edge
3 mm (0.12 in)
20 mm (0.79 in)
0 or 3 mm (0 or 0.12
20 mm (0.79 in)
in)
Print Area
P.352
➔
Recommended Print Area
Bottom Edge
Sides
23 mm (0.91 in)
5 mm (0.20 in)
5 mm (0.20 in)
5 mm (0.20 in)
661