Messages Regarding Printing Or Adjustment; Cannot Print As Specified; Before Borderless Printing, Move The Blue Platen Switch; Blue Platen Switch Is Dirty - Canon imagePROGRAF iPF6400SE User Manual

Cannot print as specified.

Messages regarding printing or adjustment

Messages regarding printing or adjustment
Cannot print as specified. ..................................................................................................................................... 652
Cannot adjust printhead. ...................................................................................................................................... 654

Before borderless printing, move the blue platen switch. ...................................................................................... 652

Borderless printng not possible. ........................................................................................................................... 648

Blue platen switch is dirty. .................................................................................................................................... 652

Move the blue platen switch No.xx to the right. (xx represents a number) ............................................................. 652

Cannot adjust paper feed. .................................................................................................................................... 652

Check printed document. ..................................................................................................................................... 653
Cannot print as specified.
Cannot print as specified.
"Replace paper with A4/LTR (vertical) or larger"
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.)
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received.
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause
The blue Switch on the platen is dirty.
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
The printer has detected that the blue Switch on the platen needed in
maintenance during printing is set away from the ● mark.
Cannot adjust paper feed.
Cannot adjust paper feed.
The Printhead nozzles are clogged.
652
Cause
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cause
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Cause
Cause
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the pa-
per.
(See "Removing Sheets.")
P.390
➔
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
The printer will resume printing.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
P.592
➔
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.")
Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
Corrective Action
P.21
➔
Corrective Action
P.626
➔
Corrective Action
Corrective Action
P.576
➔
iPF6400SE
P.626
➔
User's Guide