Accounting Manager Basic Procedures - Canon imagePROGRAF iPF6400SE User Manual

Accounting Manager Basic Procedures

•
If the job has multiple pages, the width of the last page is displayed.
Note
• Paper Length
The length of paper used for printing.
• Ink Consumed
The amount of ink used for printing.
• Owner
The sender of the job.
• Print Job Start Time/Print Time
The time when printing started and the time taken to print.
• Number of Pages
The number of pages printed.
• Roll Paper Width
The width of roll paper used for printing.
• Paper Cost
The cost of paper used for printing.
•
If the paper unit cost is not set, **** is displayed.
Note
• Total Ink Cost
The total value of the cost of ink used for printing.
•
If the ink unit cost is not set, **** is displayed.
Note
• Total of Other Costs
The total value of costs other than paper and ink.
• Ink Cost Details
The cost of each ink color.
• Ink Consumption Details
The amount of each color of ink used.

Accounting Manager Basic Procedures

Accounting Manager Basic Procedures
The first time you use the Accounting Manager, use the following procedures to configure the settings.
1
Configure unit costs, including the costs of ink and paper.
For details of the unit cost settings, see "Configuring Unit Costs in Accounting Manager."
2
Set options such as the units displayed.
For details of the unit settings, see "Configuring Units and Display Settings in Accounting Manager."
3
If you are using Regular Data Acquisition, configure the Regular Data Acquisition settings.
For details of the Regular Data Acquisition settings, see "Automatically Acquiring Print Job Logs at Regular
540
Intervals."
P.545
➔
iPF6400SE
P.541
➔
P.545
➔
User's Guide