Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
Cause
The loaded paper is a size
not compatible with border-
less printing.
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.

Skew Check Lv. on the Control Panel menu is set to something
other than Off and the roll paper is not placed securely in the Roll
Holder during loading.
User's Guide
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The docu-
ment will be printed with a border.
Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between the ink
grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in) rolls, attach the included
Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The docu-
ment will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Cause
Roll paper is not securely in contact with roll holder.
Corrective Action
P.356
➔
P.363
➔
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.")
3.
Load the Roll Holder in the printer.
P.363
➔
649