iPF6400SE
9
Access the Page Setup pane.
10
Select and click a roll paper in the
11
Select the paper width of the roll loaded in the printer for
selected.
12
C
Make sure the
Page Size setting matches the origi-
nal size as selected in
tributes dialog box—in this case, ISO A4.
13
D
Select the
Enlarged/Reduced Printing check box.
14
G
Click
Scaling and enter 120.
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
Note
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals by selecting the
15
Confirm the print settings, and then click
•
For tips on confirming print settings, see "Confirming Print Settings ."
Note
User's Guide
A
Paper Source list.
C
Paper Size in the Page At-
M
Print to start printing.
Resizing Originals by Entering a Scaling Value (Mac OS)
B
Roll Width. In this case, ISO A2/A3 (420.0mm) is
J
Print Centered check box.
P.271
➔
65