Canon imagePROGRAF iPF6400SE User Manual page 579

iPF6400SE
Access the menu for Printhead replacement
•
When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of the
Printhead become hot during printing, and there is a risk of burns from touching these parts.
Caution
•
Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for re-
placement.
Important
•
Prepare a new Ink Tank when ink levels are low.
•
Note
When the remaining capacity of Maintenance cartridge is low, prepare a new Maintenance cartridge.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Replace P.head, and then press the OK button.
The ink begins to be drawn in, and instructions appear on the Display Screen after this has finished.
It takes about three minutes to complete.
Replace the Printhead
1
Open the Top Cover.
Instructions are now shown on the Display Screen regard-
ing Printhead replacement.
User's Guide
).
Replacing the Printhead
579