Canon imagePROGRAF iPF6400SE User Manual page 414

Add Custom Paper
11
The Test Print Settings dialog box is displayed.
Select the print priority and print quality of the test print
using Print Priority and Print Quality.
Set the level to test print using Maximum ink usage
and the image to use using Image used in test print,
and then click the Start Print button.
12
Determine and set the ink level that is thought to give the best
visual test print results with no bleeding or scraping of ink.
Note
414
•
Select the optimal ink level by referring to the help.
•
If you cannot obtain sufficiently high quality printing no matter which maximum ink usage level you select, use
the Step 1: Select the standard paper dialog box to change the paper that is the basis of the custom paper
to another paper.
•
Because this settings imposes an upper limit on the amount of ink used during printing, the printing result
might not change even if the level is changed depending on the image.
•
The color tone cannot be configured using the Media Configuration Tool. Although the color tone may change
when the maximum ink usage is changed, at this point you should select the optimal level by only focusing on
bleeding and scraping of ink. If the color tone needs to be adjusted, provide an ICC color profile that matches
the paper you are using, and select that ICC color profile in your software. For details on how to specify the
ICC profile in the printer driver, see "Matching Sheet ."
•
Depending on the maximum ink usage setting, some of the print qualities in the printer driver may become
unselectable.
P.167
➔
iPF6400SE
User's Guide