Canon imagePROGRAF iPF6400SE User Manual page 442

Add Custom Paper
7
The Step 3: Paper Source Settings dialog box is dis-
played. Select the paper source where the custom paper
is loaded and then click the OK button.
8
The Step 4: Paper feed adjustment dialog box is dis-
played. Click the Execute button to execute paper feed
adjustment.
The adjustment pattern is printed, and the paper feed is
automatically adjusted based on the printing result.
Once the paper feed adjustment is complete, click the
Next button.
Important
9
The Roll Paper Settings dialog box is displayed.
Note
Configure the following settings as necessary, and then click the Next button.
442
Automatic Cutting Settings
•
Check that there is no paper left on the ejection guide.
•
If Paper Feed Adjustment is not executed, horizontal stripes with different color tones may appear in the
printed material. Paper feed adjustment does not need to be executed more than once. Execute paper feed
adjustment only once each time you add a custom paper.
•
If a paper source other than Roll Paper is selected in the Step 3: Paper Source Settings dialog box, this
screen is not displayed.
Setting
Configures the method for cutting roll paper when it is ejected after printing.
•
Automatic Cut:Roll paper is automatically cut by the cutter unit.
Details
iPF6400SE
User's Guide