Cannot Feed Paper; Cannot Cut Paper - Canon imagePROGRAF iPF6300S User Manual

Cannot feed paper.

Cause
Paper could not be ad-
vanced correctly during
feeding.
Paper could not be ad-
vanced correctly during
ejection.

Cannot cut paper.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstructing
the Cutter Unit.
You are not using the printer
under the recommended en-
vironmental conditions for
the paper.
You are using paper that is
not compatible with auto-
matic cutting.
In other cases, the Cutter
Unit may be damaged.
iPF6300S
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
3. Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
1. Press the OK button and remove the paper.
2. Load paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various types
of paper. For details on the recommended environmental conditions, see the Paper Ref-
erence Guide.
(See Paper Reference Guide .)
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See Paper Reference Guide .)
2. Press the OK button and remove the paper.
Contact your Canon dealer for assistance.
Error Message > Messages regarding paper
Corrective Action
→P.1014
→P.1018
→P.784
→P.809
→P.1014
→P.1018
Corrective Action
→P.784
→P.797
>
13
1059
Cannot feed paper.