Canon imagePROGRAF iPF6400SE User Manual page 292

Paper Settings Panel
•
Always select media type that is actually set in the printer. When the media you chose is different from the media
set in the printer, you may not receive the desired print results.
Note
• Easy Settings / Advanced Settings
Two modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
• Easy Settings
• Advanced Settings
• Paper Source
You can select the paper source.
The following settings are available for paper source.
Manual
Manual (3mm margins)
Roll Paper
•
When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become
defective depending on the paper used. If this happens, select another paper source.
Note
• Roll Paper Width
This selects the width of the roll media set to the printer.
•
Available only if rolls are selected in Paper Source.
Note
• Copies
You can input the number of print copies in numerical characters.
•
The maximum value is 999.
•
You can change the numbers by clicking either ▲ button or ▼ button.
Note
Restore Defaults Button
•
Click the button to reset to the setting when starting Preview.
Print Button
•
Click the button to begin printing.
Update Printer Info. Button
•
Click the button to acquire printer information.
292
P.293
➔
P.294
➔
Setting
Select for manual paper feed printing.
Select for manual paper feed printing when you want to minimize the margin at the far end
edge of paper.
Select to print on roll paper.
Details
iPF6400SE
User's Guide