Paper Size Options Dialog Box - Canon imagePROGRAF iPF6400SE User Manual

iPF6400SE
• N
Roll Paper Options
Complete optional roll paper settings. Click to display the Roll Paper Options dialog box.
A
Under Automatic Cutting, you can specify Yes or No and Print Cut Guideline.
Cutting Roll Paper After Printing
•
B
Select Banner Printing when printing multiple pages continuously.
Printing Multiple Pages Continuously
•
• O
Size Options
Click to display the Paper Size Options dialog box, which enables you to register additional paper sizes or select
the size system for use.

Paper Size Options Dialog Box

•
• S
Defaults
Restores all settings on the sheet to the default values.

Paper Size Options Dialog Box

Paper Size Options Dialog Box
In the Paper Size Options dialog box, you can create and register your own Custom Paper Size. The sizes you define
are listed with standard paper sizes for selection later as needed.
•
You cannot create any arbitrary roll paper width as a Custom Paper Size.
•
Important
If you select a Paper Size from Paper Size Options, load paper of a size equal to or larger than the Paper Size
Options into the printer. If the size of the loaded paper is smaller than the Paper Size Options, an incomplete output
image may be printed.
•
To display the Paper Size Options dialog box, on the Page Setup sheet, click Paper Size Options. (See "Page Setup
Sheet .")
P.171
➔
Note
User's Guide
P.144
➔
P.106
➔
P.173
➔
Paper Size Options Dialog Box
173