Removing Rolls From The Roll Holder - Canon imagePROGRAF iPF6400SE User Manual

Removing Rolls From the Roll Holder

•
To load new paper in the printer at this point, see "Loading Rolls in the Printer."
Note

Removing Rolls From the Roll Holder

Removing Rolls From the Roll Holder
1
Remove the Holder Stopper from the Roll Holder.
2
Remove the roll from the Roll Holder.
3
Remove any attachments as follows.
3-Inch Paper Core Attachment
•
Spread the tips (b) of the 3-Inch Paper Core At-
tachment that protrude by the triangular label (a) of
the Roll Holder as shown and remove the 3-Inch
Paper Core Attachment.
• Spacer for Borderless Printing
Remove the Spacer for Borderless Printing from the Roll Holder
as shown.
372
P.365
➔
iPF6400SE
User's Guide