Configuring Called-Number Verification For Incoming Calls; Configuring Isdn Calling Number Identification - HP MSR Router Series Wan Access Configuration Manual

To configure calling number verification for incoming calls:
Step
1. Enter system view.
2. Enter ISDN BRI or PRI interface
view.
3. Configure an accepted calling
number.

Configuring called-number verification for incoming calls

Called-number verification enables an ISDN interface to accept only calls placed to specific called
numbers. You can configure the ISDN interface to verify only the called number or both the called
number and the called subaddress. The ISDN interface will accept a call only if the called-number
information matches one entry in the list of acceptable called numbers.
To configure called-number verification for incoming calls:
Step
1. Enter system view.
2. Enter ISDN BRI or PRI
interface view.
3. Configure an
acceptable called
number.

Configuring ISDN calling number identification

ISDN calling number identification enables an ISDN interface to include the call number of a calling
party in the outgoing call SETUP messages. The calling number information can be used for various
purposes. For example, the service provider can use this information to identify the pricing scheme for the
calling party. The called party can use this information to verify the origin of calls.
For the called party to receive the calling number, the connected service provider switch must support
transmitting calling numbers.
HP recommends that you do not configure the calling number to be sent for voice services.
To configure calling number identification:
Step
1. Enter system view.
Command
system-view
interface interface-type interface-number
isdn caller-number caller-number
Command
system-view
interface interface-type interface-number
isdn check-called-number check-index
called-party-number
Command
system-view
119
Remarks
N/A
N/A
By default, an ISDN
interface accepts calls
from any calling numbers.
Remarks
N/A
N/A
You can include a
colon-separated subaddress
when you specify the called
number, for example,
66668888:13525.
By default, ISDN does not
check the called number or
subaddress in incoming SETUP
messages.
Remarks
N/A