Displaying And Maintaining Hdlc Link Bundling; Hdlc Link Bundling Configuration Example; Network Requirements - HP MSR Router Series Wan Access Configuration Manual

Step
4. Assign the interface to an
HDLC link bundle.
5. Set the bundling priority for
the member interface.

Displaying and maintaining HDLC link bundling

Execute display commands in any view and reset commands in user view.
Task
Display information about an
HDLC link bundle (centralized
devices in standalone mode).
Display information about an
HDLC link bundle (distributed
devices in standalone
mode/centralized devices in IRF
mode).
Display information about an
HDLC link bundle (distributed
devices in IRF mode).
Display information about an
HDLC link bundle interface.
Clear statistics for an HDLC link
bundle interface.

HDLC link bundling configuration example

Network requirements

As shown in
Router B, create an HDLC link bundle.
Figure 36 Network diagram
Command
display bundle hdlc-bundle [ bundle-id ]
display bundle hdlc-bundle [ bundle-id ] slot slot-number
display bundle hdlc-bundle [ bundle-id ] chassis chassis-number slot
slot-number
display interface [ hdlc-bundle [ bundle-id ] ] [ brief [ description | down ] ]
reset counters interface [ hdlc-bundle [ bundle-id ] ]
Figure 36, to increase bandwidth and enhance connection reliability between Router A and
Command
bundle id bundle-id
bundle member-priority priority
106
Remarks
By default, an interface is not
assigned to any HDLC link bundle.
The default setting is 32768.