Displaying And Maintaining 3G/4G Modem Information; 4G Modem Management Configuration Examples; 3G Modem Management Configuration Example - HP MSR Router Series Wan Access Configuration Manual

Displaying and maintaining 3G/4G modem
information
Execute display commands in any view and the reset command in user view.
Task
Display the call connection information
for the 3G/4G modem.
Display information about a cellular
interface.
Display information about an
Eth-channel interface.
Clear the statistics for a cellular
interface.
Clear the statistics for an Eth-channel
interface.
3G/4G modem management configuration
examples

3G modem management configuration example

Network requirements
As shown in
• The router provides a USB 3G or SIC-3G modem.
The PC dials up to access a 3G network through Dial-on-Demand Routing (DDR).
•
For more information about DDR dialup, see "Configuring DDR."
Figure 52 Network diagram
Configuration procedure
# Create dialer group 1 and configure DDR to place calls for IP packets.
<Router> system-view
[Router] dialer-group 1 rule ip permit
# Channelize the cellular interface into a synchronous/asynchronous serial interface.
[Router] controller cellular 2/4/0
[Router-Cellular2/4/0] serial-set 0
Figure 52:
Command
display cellular [ interface-number ]
display controller [ cellular [ interface-number ] ]
display interface [ eth-channel [ channel-id ] ] [ brief [ description |
down ] ]
reset counters controller [ cellular [ interface-number ] ]
reset counters interface [ eth-channel [ channel-id ] ]
168