HP MSR Router Series Wan Access Configuration Manual page 22

Step
1. Enter system view.
2. Configure a PPP address pool.
3. (Optional.) Configure a
gateway address for the PPP
address pool.
4. (Optional.) Configure a PPP
address pool route.
5. Enter ISP domain view.
6. Associate the ISP domain with
the configured PPP address pool
for address assignment.
7. Return to system view.
8. Enter interface view.
9. Configure an IP address for the
interface.
To configure the device as the server (Method 3: Associate a DHCP address pool with an ISP domain):
Step
1. Enter system view.
2. Configure DHCP.
3. Enter ISP domain view.
Command
system-view
ip pool pool-name start-ip-address
[ end-ip-address ] [ group
group-name ]
ip pool pool-name gateway
ip-address [ vpn-instance
vpn-instance-name ]
ppp ip-pool route ip-address
{ mask-length | mask }
[ vpn-instance vpn-instance-name ]
[ vsrp-instance
vsrp-instance-name ]
domain isp-name
authorization-attribute ip-pool
pool-name
quit
interface interface-type
interface-number
ip address ip-address
Command
system-view
•
If the server acts as a DHCP
server, configure the DHCP
server and a DHCP address
pool on the server.
•
If the server acts as a DHCP
relay agent, configure the
DHCP relay agent on the server,
and configure a DHCP address
pool on the remote DHCP
server. In addition, you must
enable the DHCP relay agent to
record relay entries, and
configure a DHCP relay
address pool.
domain isp-name
13
Remarks
N/A
By default, no PPP address pool
is configured.
By default, the PPP address pool
is not configured with a gateway
address.
By default, no PPP address pool
route exists.
The destination network of the
PPP address pool route must
include the PPP address pool.
N/A
By default, no PPP address pool
is associated.
For more information about this
command, see Security
Command Reference.
N/A
N/A
By default, no IP address is
configured on an interface.
This command is optional when
the PPP address pool is
configured with a gateway
address.
Remarks
N/A
For information about
configuring DHCP, see Layer 3
IP Services Configuration Guide.
N/A