Command And Hardware Compatibility; Frame Relay Configuration Task List - HP MSR Router Series Wan Access Configuration Manual

Figure 72 Interconnecting LANs through a Frame Relay network
Router A
Ser2/1/0
202.38.163.251/24
DLCI=50
DLCI=60
Figure 73 Interconnecting LANs through a dedicated line

Command and hardware compatibility

Commands and descriptions for centralized devices apply to the following routers:
MSR1002-4/1003-8S.
•
• MSR2003.
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

Frame Relay configuration task list

Tasks at a glance
Configure DTE-side Frame Relay:
•
(Required.)
•
(Required.)
•
(Required.)
•
(Optional.)
•
(Optional.) Perfrom one of the following tasks:
Configuring Frame Relay IPHC
Configuring Frame Relay STAC compression
•
(Optional.) Configuring Frame Relay FRF.12 fragmentation
FR
Configuring basic DTE-side Frame Relay
Configuring local Frame Relay virtual circuits
Configuring Frame Relay address mapping
Configuring Frame Relay subinterfaces
Router B
Ser2/1/0
202.38.163.252/24
DLCI=70
Router C
Ser2/1/0
202.38.163.253/24
DLCI=80
235