HP MSR Router Series Wan Access Configuration Manual page 15

Configuring PAP authentication
To configure the authenticator:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the authenticator to
authenticate the peer by using
PAP.
4. Configure local or remote
AAA authentication.
To configure the peer:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the PAP username
and password sent from the
peer to the authenticator
when the peer is
authenticated by the
authenticator by using PAP.
Configuring CHAP authentication
Depending on whether the authenticator is configured with a username, the configuration of CHAP
authentication includes the following types:
Configuring CHAP authentication when the authenticator name is configured
•
To configure the authenticator:
Step
1. Enter system view.
2. Enter interface view.
Command
system-view
interface interface-type
interface-number
ppp authentication-mode pap
[ [ call-in ] domain isp-name ]
For local AAA authentication, the
username and password of the
peer must be configured on the
authenticator.
For remote AAA authentication,
the username and password of the
peer must be configured on the
remote AAA server.
For more information about AAA
authentication, see Security
Configuration Guide.
Command
system-view
interface interface-type
interface-number
ppp pap local-user username
password { cipher | simple }
password
Command
system-view
interface interface-type
interface-number
6
Remarks
N/A
N/A
By default, PPP authentication is
disabled.
The username and password
configured for the peer must be the
same as those configured on the
peer.
Remarks
N/A
N/A
By default, when being
authenticated by the authenticator
by using PAP, the peer sends null
username and password to the
authenticator.
Remarks
N/A
N/A