Modem Management Configuration Task List; Configuring A Cellular Interface For A 3G Modem - HP MSR Router Series Wan Access Configuration Manual

Tasks at a glance
(Optional.) Configuring PIN verification
(Optional.)
(Optional.)
(Optional.)
(Optional.)
4G modem management configuration task list
Tasks at a glance
Configuring a cellular interface for a 4G modem
Configuring an Eth-channel interface for a 4G modem
Configuring an IP address for an Eth-channel interface of a 4G modem
Configuring a 3G/4G network
Configuring parameter profiles
(Optional.) Configuring PIN verification
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Configuring a cellular interface for a 3G modem

Step
1. Enter system view.
2. Enter cellular interface view.
3. Configure a description for the
cellular interface.
4. Channelize the cellular
interface into a
synchronous/asynchronous
serial interface.
5. Bring up the cellular interface.
Configuring DM
Issuing a configuration directive to a 3G/4G modem
Configuring automatic reboot
Configuring manual reboot
Configuring DM
Issuing a configuration directive to a 3G/4G modem
Configuring automatic reboot
Configuring manual reboot
Command
system-view
controller cellular cellular-number
description text
serial-set set-number
undo shutdown
161
Remarks
N/A
N/A
By default, the description for a
cellular interface is interface name
Interface, for example, Cellular
2/4/0 Interface.
This command names the serial
interface as serial
cellular-number:set-number.
By default, the cellular interface is
up.