Yamaha CL1 Reference Manual page 105

8.
If you're auditioning the CUE signal in the monitor, adjust the Cue signal level by
using the MONITOR LEVEL knob located in the SCENE MEMORY/MONITOR section
of the top panel. Also adjust the MONITOR FADER LEVEL in conjunction with this.
If PHONES LEVEL LINK is ON, the cue signal level when monitoring through headphones can
be adjusted in three ways: the CUE LEVEL knob, the MONITOR FADER, and the PHONES
LEVEL knob.
NOTE
To adjust the level to the cue out port you specified in step 5, adjust the gain of the output port
that is patched to it.
9.
To defeat cue, press the currently-on [CUE] key once again.
You can press the CLEAR CUE button in the Meter field of the CUE popup window to clear all
cue selections.
NOTE
• If you press the CUE meter in the Function Access Area, all cue selections will be cleared.
• All cue selections will be cleared if you switch between MIX CUE mode and LAST CUE mode in
the CUE MODE section.
• You can also assign the function of the CLEAR CUE button to a USER DEFINED key
(see page 169).
105
Monitor and Cue functions
Reference Manual