Using The Cl Console With Nuendo Live - Yamaha CL1 Reference Manual

Using the CL console with Nuendo Live

The CL series consoles can operate in an integrated manner with Steinberg's Nuendo Live DAW
software.
In addition to the equipment and software mentioned in
computer" on page 25, the "CL Extension" software which integrates the CL series and Nuendo Live can
be installed in your computer, allowing you to operate Nuendo Live from the CL series console to easily
perform multi-track recording operations.
Here we explain how to operate Nuendo Live from the CL series console.
Preparing the project
Make the following settings as described in "Recording or playing back using DAW on a
page 25.
1.
Setting up Dante Virtual Soundcard or Dante Accelerator
Specify the audio format, network settings, and ASIO driver settings so that Dante Virtual
Soundcard (DVS) or Dante Accelerator (DANTE-ACCEL) can be used.
2.
Setting up Dante Controller
Use Dante Controller to patch between the I/O device and DVS, and between DVS and the CL
series console. Assign the signals from the I/O device to the various input ports of DVS. Patching
can also be specified from the CL series console.
NOTE
Separately, route the signals from I/O devices to the channels on the CL series console. (see
page 138)
"Recording or playing back using DAW on a
computer" on
The following example shows Dante Controller settings for patching I/O device channels 1–16 to
DVS.
In this case, the DANTE INPUT PATCH settings of the CL series console must be switched when
changing between multi-track recording and multi-track playback. Switching will be easy if
you've stored the respective settings in the DANTE INPUT PATCH LIBRARY (see
3.
Setting up Nuendo Live
When you start Nuendo Live and create a new project, a track for each channel specified for DVS
will be created automatically. In addition, the tracks will automatically use the channel names and
color information as specified on the CL series console.
Make the following settings in Nuendo Live.
• In Setup button → Audio System, select DVS or DANTE-ACCEL as the driver.
NOTE
For details on the settings of each software program, refer to the manual for that software.
188
Recorder
page 139).
Reference Manual