Remotely Controlling An Amp - Yamaha CL1 Reference Manual

Remotely controlling an amp

Here's how to remotely control an amp that's connected to the Dante connector.
1 2
1.
In the upper part of the I/O DEVICE screen, press the AMP tab to access the AMP
field.
The AMP field includes the following items.
1
Display switch buttons
Press one of these buttons to view the corresponding I/O device.
2
ID/model name indication
This shows the ID number, model name, and version of the I/O device.
3
DANTE SETUP button
Press this button to open the DANTE SETUP popup window, in which you can make settings for
the audio network.
2.
3
143
Press a displayed I/O device to open the OUTPUT PATCH popup window.
If you need to make output port settings, make these settings as described in step 7 and following
of the I/O device patching procedure (see page
I/O device and external head amp
140).
Reference Manual