Adjusting The Contrast Of The Channel Name Display; Dante Audio Network Settings - Yamaha CL1 Reference Manual

Adjusting the contrast of the channel name
display
If necessary, you can adjust the contrast of the channel name display.
1.
While holding down the SCENE MEMORY [STORE] key of the panel, turn on the
power.
After the welcome screen, the following startup menu screen will appear.
2.
Press the CHANNEL COLOR CALIBRATION button.
The CHANNEL COLOR CALIBRATION MODE screen will appear, allowing you to adjust the
channel color.
3.
Hold down a [SEL] key on the panel, and turn multi-function knob 1 in the
Centralogic section.
Turning the knob toward the left will lighten the contrast of all channels; turning it toward the
right will darken the contrast of all channels.
4.
If you want to adjust a channel whose contrast differs from that of the other
channels, hold down the [SEL] key of the desired channel and press its [CUE] key
or [ON] key.
Pressing the [CUE] key will darken the contrast, and pressing the [ON] key will lighten the
contrast.
5.
When you have finished adjusting the contrast, press the APPLY button located in
the right of the screen to confirm the change.
NOTE
The APPLY button appears only if you change the setting.
6.
Press the EXIT button.
The CL will start up in normal operating mode.
NOTE
Alternatively, you can continue operation by selecting a different menu instead of pressing the
EXIT button.

Dante audio network settings

You will use the CL series console to make Dante audio network settings for the console itself and the
I/O devices connected to the Dante connector of the CL series console. This section explains how to
make Dante audio network settings.
Setting up a Dante audio network
1.
In the function access area, press the SETUP button to access the SETUP screen.
2.
In the DANTE field at the center of the screen, press the DANTE SETUP button to
open the DANTE SETUP popup window.
213
Other functions
Reference Manual