Initializing The Parameters Of A Channel - Yamaha CL1 Reference Manual

Initializing the parameters of a channel

You can restore the parameters of a channel to an initialized state. This operation can be performed on
any channel(s).
1.
In the Function Access Area, press the CH JOB
button to access the CH JOB menu.
2.
Press the DEFAULT button to access the CH
DEFAULT MODE popup window.
This popup window enables you to initialize parameters.
1
3
1
TARGET CHs field
This field indicates the channel selected for initialization. While this window is displayed, press a
[SEL] key on the top panel to select an input channel (multiple selection is allowed). The field will
indicate the selected channel(s). Press the same [SEL] key once again to de-select the channel(s).
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
2
DEFAULT button
After selecting the channel, press this button to execute the initialization operation.
3
CLOSE button
Press this button to close the popup window and return to the previous screen.
3.
4.
5.
DEFAULT button
2
76
To select the channel(s) to be initialized, press the corresponding [SEL] key to make
it light (multiple selections are allowed).
The corresponding channel(s) are highlighted in the TARGET CHs field of the window.
If you want to de-select all of the selected channels, press the TARGET CHs field.
To execute the initialization, press the DEFAULT button.
The parameters of the selected channel(s) will be initialized.
After initialization, the TARGET CHs field will be empty (nothing is selected).
To close the CH DEFAULT MODE popup window, press the CLOSE button.
Grouping and linking
Reference Manual