Setup - Yamaha CL1 Reference Manual

• HA................................................ Restricts operation of the HA (Head Amp) patched to that
channel.
• PROCESSING ........................... Restricts operation of all signal processing parameters for that
channel (excluding the fader, channel on/off, and send level).
• FADER/ON ................................ Restricts operation of that channel's fader, channel on/off, and
send level.
• WITH SEND ............................. Restricts operation of that channel's send parameters. (From
MIX, From MATRIX)
• DCA MASTER .......................... Restricts operation of that channel's DCA group fader, ON/
OFF, and ICON/COLOR/NAME.
• DCA GROUP ASSIGN............ Restricts changes of assignment to that DCA group.
• SET BY SEL................................ If this button is on, you can press the panel [SEL] key of a
channel to enable or disable the operating restrictions for that
channel.
2
CURRENT SCENE
Specifies the operations that can be performed on the current scene memory.
• INPUT PATCH/INPUT NAME.................. Restricts operations for input channel patching
• OUTPUT PATCH/OUTPUT NAME......... Restricts operations for output channel patching
• BUS SETUP................................ Restricts operations for bus setup.
• GEQ RACK/EFFECT RACK/PREMIUM RACK
........................................ Restricts operations for the racks. Press this area to open the
RACK USER LEVEL popup window, in which you can set this
restriction. However, there will be no restriction on operating
the MIDI CLK button displayed for delay-type and
modulation-type effects, or the PLAY/REC button displayed
for the FREEZE effect.
• MUTE GROUP ASSIGN/MUTE GROUP MASTER
........................................ Restricts operations for mute group assignment and mute
group master.
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3
SCENE LIST
Specifies the operations that can be performed on scene memories.
• STORE/SORT operations
• RECALL operations
4
LIBRARY LIST
Specifies the operations that can be performed on libraries.
• STORE/CLEAR operations
• RECALL operations
and names.
and names.
5
FILE LOAD
Specifies the settings that will be applied when a file is loaded from a USB flash drive. The user
authentication key contains settings such as the user level, preferences, and the USER DEFINED
key settings (USER SETUP settings). Other data is saved in an "ALL" file. The "ALL" file also
includes the USER SETUP settings of the Administrator and the Guest.
• USER SETUP (Preference and USER DEFINED keys settings)
• SYSTEM SETUP/MONITOR SETUP
• CURRENT SCENE
• SCENE LIST
• LIBRARY LIST
6
MONITOR SETUP
Specifies the monitor setup operations that can be performed.
• OSCILLATOR
• TALKBACK
7
SYSTEM SETUP
Specifies the system setup operations that can be performed.
• MIXER SETUP
• OUTPUT PORT
• MIDI/GPI
8
SET ALL/CLEAR ALL button
Permits/clears all items.
4.
Specify the user level by pressing the button for each item that will be permitted.
5.
When you have finished making settings, close the popup window and press the
SETUP button in the Function Access Area.
167
User settings (Security)
Reference Manual