Specifying The Brightness Of The Touch Screen, Leds, Channel Name Displays, And Lamps; Setting The Date And Time Of The Internal Clock - Yamaha CL1 Reference Manual

Specifying the brightness of the touch screen,
LEDs, channel name displays, and lamps
Follow the steps below to specify the brightness of the touch screen, top panel LEDs, channel name
displays, and lamps connected to the rear panel LAMP connectors.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
In the field located in the right of the bottom row of the SETUP screen, press the
BANK A or BANK B button.
You can save two different brightness settings in bank A and B, and switch between them rapidly
if desired.
3.
Use the multifunction knobs to set the following parameters.
CONTRAST field
• NAME .........................Adjusts the contrast of the characters in the channel name displays on
the top panel.
BRIGHTNESS field
• NAME .........................Adjusts the brightness of the channel name displays on the top panel.
This will also change the CH COLOR brightness. If you want to adjust
the CH COLOR brightness after setting the name display brightness, use
the CH COLOR knob.
• CH COLOR................Adjusts the brightness of the channel colors on the top panel. This lets
you apply a relative adjustment to only the channel color brightness
without changing the channel name display brightness.
• SCREEN......................Adjusts the brightness of the touch screen. If the brightness is set to lower
than level 2, the CL will start up next time with a brightness setting of 2
so that you will be able to see the screen.
• PANEL ........................Adjusts the brightness of the top panel LEDs. If the optional MBCL
meter bridge is installed on the CL3/CL1, this knob setting will also
affect the LEDs on the meter bridge.
NOTE
If the AD8HR is connected, the brightness of the AD8HR's LEDs will also change.
• LAMP ..........................Adjusts the brightness of the lamps connected to the rear panel LAMP
jacks.
4.
If desired, switch between banks A and B and make settings for the other bank in
the same way.
Now you can switch between the BANK A and BANK B buttons to change the brightness of the
touch screen, LCD, channel name displays, and lamps in a single operation. You can also assign
this parameter to a USER DEFINED key, and press that key to switch between banks A and B.

Setting the date and time of the internal clock

This section explains how to set the date and time of the CL console's internal clock, and how to select
the date and time display format.
The date and time you specify here will affect the time stamp used when saving a scene.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
In the center of the SETUP screen, press the DATE/TIME button to access the DATE/
TIME popup window.
This popup window includes the following items.
1) DATE
Specifies the date of the internal clock.
2) TIME
Specifies the time of the internal clock.
3) FORMAT
Specifies the format in which the time of the internal clock is displayed.
3.
In the FORMAT field, press the MODE buttons several times to select the desired
format for date and time display.
You can select from the following display formats.
• Date
MM/DD/YYYY (Month/Day/Year)
DD/MM/YYYY (Day/Month/Year)
YYYY/MM/DD (Year/Month/Day)
• Time
24-Hour (hours shown in the range of 0–23)
12-Hour (hours shown from 0am–11am, and 0pm– 11pm)
4.
Use multifunction knobs 1–6 on the top panel to specify the current date and time.
5.
When you have finished making settings, press the OK button.
The date, time, and display format you specified will be finalized, and the popup window will
close. If you press the CANCEL button or the "x" symbol instead of the OK button, your changes
will be discarded and the popup window will close.
204
Other functions
Reference Manual