Setup - Yamaha CL1 Reference Manual

• PROGRAM CHANGE EVENT
...............................Indicates the type/number/title of the event assigned to each channel
(bank number) or program number. Press an individual event display
area to access the MIDI PROGRAM CHANGE popup window, in which
you can select the event that you want to assign.
4
Scroll knob
Press this knob to scroll the list using the multifunction knob.
5
CLEAR ALL button
Press this button to erase all events from the list.
6
INITIALIZE ALL button
Press this button to restore all event assignments on the list to their default state.
6.
Use the buttons in the PROGRAM CHANGE MODE field to select the Program
Change transmission/reception mode.
You can select one of the following two Program Change transmission/reception modes.
• Multi mode (when the MULTI button is on):
Program changes of all MIDI channels will be transmitted and received. (The transmit/receive
channel specified in the MIDI SETUP page will be ignored.)
When a Program Change is received, the event assigned to the corresponding MIDI channel and
program number in the list will be executed.
When you execute the specified event on the CL series console, the Program Change of the
corresponding MIDI channel and program number in the list will be transmitted.
• Single mode (when the SINGLE button is on):
Only Program Changes of the transmit (Tx) and receive (Rx) channels specified in the MIDI
SETUP page will be transmitted and received.
When a Program Change on the Rx channel is received, the event assigned to that program
number of the corresponding channel in the list will be executed.
When you execute the specified event on the CL series console, the Program Change of the
corresponding program number will be transmitted on the Tx channel shown in the list. (If an
event is assigned to more than one program number on the same channel, the lowest-numbered
program number will be transmitted.)
If you turn on the OMNI button/BANK button in Single mode, operation will change as follows.
• When the OMNI button is on:
Program changes of all MIDI channels will be received. However, regardless of the MIDI channel
that is received, the event assigned to the corresponding program number of the Rx channel will
be executed. Turning on the OMNI button will not change the operation for Program Change
transmission.
• When the BANK button is on:
The CH indication in the list will change to BANK (bank number), and Bank Select (Control
Change #0, #32) and Program Change messages can be transmitted and received. This can be
convenient if you want to control more than 128 events on a single MIDI channel.
When Bank Select and then Program Change messages (in that order) are received on the Rx
channel, the event assigned to that bank number and program number in the list will be executed.
When you execute a specific event on the CL series console, Bank Select and Program Change
messages for the bank number and program number assigned to that event will be transmitted on
the Tx channel. (If the same event is assigned more than once in the list, the lowest-numbered
bank number and program number will be transmitted.)
NOTE
• The settings of the OMNI and BANK buttons are ignored in Multi mode.
• If the BANK button is on and only a Program Change on an applicable MIDI channel is received,
the last-selected bank number will be used.
• If the BANK button is on, the OMNI button can also be turned on at the same time. In this case,
Bank Select and Program Change messages of all MIDI channels will be received.
7.
Use the buttons in the PROGRAM CHANGE field to turn transmission and reception
on or off, and make settings for echo output.
This field includes the following items.
• Tx button ................... Switches Program Change transmission on or off.
• Rx button ................... Switches Program Change reception on or off.
• ECHO button............ Selects whether incoming Program Changes are echoed-out from the
MIDI transmission port.
153
MIDI
Reference Manual