Yamaha CL1 Reference Manual page 184

3
Remaining time display
Indicates the remaining playback time of the current song during playback.
4
Current song format
Indicates the file format and bit rate of the current song (the file being played back).
5
REC RATE button
Switches the recording rate.
6
Display switch button
Switches between displaying and hiding the RECORDER INPUT and PLAYBACK OUT fields at
the bottom of the song list.
7
REW button
Moves the playback point to the beginning of the current song. If the playback point has already
been located at the beginning, the point will move to the beginning of the preceding song that has
been checked for playback.
When the playback point is not at the beginning of the current song, holding down this button
for two seconds or longer will rewind the playback point.
If you operate this button during playback, playback will resume from the point at which the
button was released.
8
STOP button
The recorder will change from play/record/recording-standby mode to stop mode.
9
PLAY/PAUSE button
Changes the recorder mode as follows:
Stop mode → Playback mode, then starts playback from the beginning of the current song
Playback mode → Playback pause mode
Playback pause mode → Playback mode, then starts playback from the paused point.
Recording standby mode → Recording mode
Recording mode → Recording-pause mode
Recording pause mode → Recording mode, then starts recording from the paused point.
0
FF button
Moves the playback point to the beginning of the next song that is marked with a PLAY check symbol.
If you hold down this button for two seconds or longer, fast-forward will occur.
If you operate this button during playback, playback will resume from the point at which the
button was released.
A
REC button
Places the recorder in recording standby mode.
The pause indicator of the PLAY/PAUSE (
NOTE
You can also assign the function of each button to a USER DEFINED key (see
) button will light.
page 169).
■ PLAY MODE field
This field enables you to specify how the recorder will behave when playback of the current song is
complete.
B
SINGLE button
If this button is on, only the current song will play.
If this button is off, when the current song finishes playing, the recorder will play the next song in
the list that is marked with a PLAY check symbol.
C
REPEAT button
If this button is on, playback will repeat. If the SINGLE button is on, only the current song will
play repeatedly. If the SINGLE button is off, all songs in the list that are marked with a PLAY check
symbol will repeatedly play in the order of the list.
If this is off, the song will play only once. If the SINGLE button is on, the current song will play
only once, and then stop. If the SINGLE button is off, all songs in the list that are marked with a
PLAY check symbol will play once in the order of the list, and then playback will stop.
3.
Connect a USB flash drive with sufficient free capacity to the USB connector.
The FREE SIZE field indicates the amount of free capacity. When you connect a USB flash drive
to the USB connector, a YPE folder and a SONGS folder within that YPE folder will be created
automatically in the root directory of the USB flash drive.
The files created by recording operations will be saved in the above SONGS folder, or in the
currently-selected folder below that level.
■ Directory structure of a USB flash drive
YPE folder
Root directory
Songs folder
4.
Assign the desired channels to the input and output of the USB memory recorder
(see page 181).
184
Recorder
Song (audio file)
Reference Manual