Editing The Internal Effect Parameters - Yamaha CL1 Reference Manual

Editing the internal effect parameters

This section explains how to change the effect type and edit the parameters.
1.
Follow steps 1–3 described in "Virtual rack
effect in a rack.
A rack in which an effect is mounted will show the following information.
1 2
1
Effect title/type
This area indicates the effect title, the name of the type that is used, and a graphic. The number of
input/output channels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also shown.
2
Input/output meters
Indicate the level of the signals before and after the effect.
2.
Press the rack in which the effect you want to edit is mounted.
The EFFECT popup window will appear, allowing you to edit the effect parameters. In the
EFFECT popup window you can use the tabs to switch among the eight racks (EFFECT 1 –
EFFECT 8).
3 4 2
1
8
9
operations" on page 115, to mount an
5
6
7
1
INPUT PATCH buttons
Press these buttons to open the CH SELECT popup window.
2
OUTPUT PATCH buttons
Press these buttons to open the CH SELECT popup window.
3
Effect type field
Displays the effect title, the name of the type that is used, and a graphic. The number of input and
output channels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also shown. Press this field to open
the EFFECT TYPE popup window, in which you can select the effect type.
4
EFFECT CUE button
Enables you to cue-monitor the output of the currently-displayed effect. This Cue function is
valid only while this screen is displayed. The cue will be canceled automatically when you switch
to a different screen.
5
Special parameter field
Indicates special parameters that are specific to some effect types.
6
BYPASS button
Temporarily bypasses the effect.
7
Input/output meters
Indicate the level of the signals before and after the effect.
8
Effect parameter field
This area indicates parameters for the currently-selected effect type. When you press a knob in
this field, you will be able to use the multifunction knobs to control the corresponding horizontal
row of knobs.
You can also make fine adjustments by rotating a knob while pressing and holding it down.
9
Rack select tabs
Use these tabs to switch among EFFECT 1–8.
125
Graphic EQ, effects, and Premium Rack
Reference Manual