Recorder; About The Usb Memory Recorder; Assigning Channels To The Input And Output Of The Recorder - Yamaha CL1 Reference Manual

Recorder

This chapter explains the functionality and operation of the recorder.

About the USB memory recorder

The CL series console features a USB memory recorder function that lets you easily record internal
signals to a USB flash drive, or play back audio files recorded on a USB flash drive.
As the file format for recording, the CL series console supports MP3 (MPEG-1 Audio Layer-3). For
playback, it supports MP3 as well as WMA (Windows Media Audio) and AAC (MPEG-4 AAC) files.
However, DRM (Digital Rights Management) is not supported.
By using the USB memory recorder, the output from the STEREO bus or a MIX bus can be recorded to
a USB flash drive, or background music or sound effects saved on a USB flash drive can be played back
via an assigned input channel.
■ Signal flow for the USB memory recorder
MIX1-24
RECORDER
MATRIX1-8
INPUT
L
USB memory
STEREO L/R
MONO
R
INPUT1-72*
DIRECT OUT
NOTE
• Recording and playback cannot be done simultaneously.
• The signal being recorded cannot be input to an INPUT channel.
PLAYBACK
OUT
L
INPUT1-72*
recorder
ST IN 1L1R-8L8R
R
* CL3: INPUT1-64, CL1: INPUT1-48
Assigning channels to the input and output of the
recorder
Follow the steps below to patch the desired channels to the input and output of the USB memory
recorder. You can patch any desired output channel or the direct output of an INPUT channel to the
recorder input, and you can patch the recorder output to any desired input channel.
1.
In the Function Access Area, press the RECORDER button to access the RECORDER
screen.
2.
Press the USB tab in the upper right of the screen.
On this screen you can assign signals to the input and output of the USB memory recorder, and
perform recording and playback operations.
1 2 3 4
1
RECORDER INPUT popup buttons (L/R)
Press these buttons to open the CH SELECT popup window, in which you can select the signals
patched to the recorder's L/R input channels.
2
RECORDER INPUT GAIN knob
Sets the level of the signal input to the recorder.
3
RECORDER INPUT CUE button
Press this button to audition the signal input to the recorder.
NOTE
You cannot turn on this button and the PLAYBACK OUTPUT CUE button simultaneously.
181
8 7 6 5
Recorder
Reference Manual