Remotely Controlling An External Head Amp - Yamaha CL1 Reference Manual

Remotely controlling an external head amp

You can remotely control from the CL series console an external head amp ("external HA") connected
via MY16-ES64 or NAI48-ES.
1.
Connect the CL series console to an external HA.
For details, refer to the "Using an external head
of your external HA.
2.
In the Function Access Area, press the I/O DEVICE button to access the I/O DEVICE
window.
3.
In the upper part of the I/O DEVICE window, press the EXTERNAL HA tab to display
the EXTERNAL HA field.
amp" on page 144 section and the owner's manual
The EXTERNAL HA field includes the following items.
5
1
2
1
EXTERNAL HA field
Indicates the state of the connected external HA.
2
ID/Model name/+48V master
Displays information for the external HA mounted in the rack. The ID number is automatically
assigned in order of the connected devices from 1 to six. This field also enables you to view the
on/off status of the master phantom power.
3
Virtual racks
This section accommodates up to six racks in which remotely-controllable external HA units can
be mounted. If an external HA is mounted, this field will indicate the HA settings (GAIN setting,
and on/off status of the phantom power and HPF). Press a rack to open the EXTERNAL HA
popup window.
4
EXTERNAL HA PORT SELECT popup button
Press this button to open the EXTERNAL HA PORT SELECT popup window, in which you can
specify the input ports to which the external HA mounted in the rack will be connected.
5
VIEW switch buttons
Switch the virtual rack display between SB168-ES and AD8HR. Select the view according to the
connected device.
146
I/O device and external head amp
6
3 4
Reference Manual