Adjusting The Brightness Of The Channel Name Display - Yamaha CL1 Reference Manual

6.
When you have finished adjusting the color, press the APPLY button located on the
right of the window to confirm the change.
NOTE
The APPLY button appears only if you change the RGB values.
7.
To reset all channel color indicators to the factory default setting, press the RESET
ALL button.
8.
Press the EXIT button.
The CL unit will start up in normal operating mode.
NOTE
Alternatively, you can continue operation by selecting a different menu instead of pressing the
EXIT button.
Adjusting the brightness of the channel name
display
If necessary, you can adjust the brightness of the channel name display.
1.
While holding down the SCENE MEMORY [STORE] key of the panel, turn on the
power.
After the welcome screen, the following startup menu screen will appear.
2.
Press the CHANNEL COLOR CALIBRATION button.
The CHANNEL COLOR CALIBRATION MODE screen will appear, allowing you to adjust the
channel color.
3.
Press the [CUE] key or [ON] key of the channel whose brightness you want to
adjust.
Pressing the [CUE] key will increase the brightness, and pressing the [ON] key will decrease the
brightness.
4.
When you have finished adjusting the brightness, press the APPLY button located
in the right of the screen to confirm the change.
5.
Press the EXIT button.
The CL will start up in normal operating mode.
NOTE
Alternatively, you can continue operation by selecting a different menu instead of pressing the
EXIT button.
212
Other functions
Reference Manual