Warning/Error Messages - Yamaha 007POTO-G0 Owner's Manual

Warning/Error Messages

Message
xxx Parameters Copied.
xxx Parameters Initialized.
xxx Parameters Pasted.
xxx Parameters Swapped with Copy Buffer. Parameter xxx was exchanged with the contents of the copy buffer.
Assignment is Restricted to Max. 8 Sources!
Cannot Bookmark This Popup.
Cannot Recall to Different Parameter Type! You attempted to recall a library of a different type.
Cannot Recall!
Cannot Select This Channel.
Cannot Store!
Cannot Undo!
Couldn't Access File.
Couldn't Write File.
Current User Changed. [xxx]
Directory Not Empty!
EFFECT CUE: Turned Off.
External HA Connection Conflict!
File Access is Busy!
File Already Exists!
File Error [xx]!
File Protected!
Help File Not Found!
Illegal Address!
Illegal MAC Address! Cannot Use Network.
Illegal Storage Format!
KEY IN CUE: Turned Off.
Loading Aborted.
Low Battery!
Maximum Number of Audio Files
Exceeded!
Memory Error! All Memories were
Initialized.
MIDI: Data Framing Error!
MIDI: Data Overrun!
MIDI: Rx Buffer Full!
MIDI: Tx Buffer Full!
No Access From Recorder!
No Controllable Knob.
No Corresponding Help Items.
No Response from External HA.
Page Bookmarked.
Password Changed.
PlayBack Failed: Recorder is Busy!
Power Supply Fan has Malfunctioned!
Processing Aborted.
Recorder Busy: Operation Aborted!
Saving Aborted.
Scene #xxx is Empty!
Scene #xxx is Protected!
Scene #xxx is Read Only!
268
LS9-16/32 Owner's Manual
Warning/Error Messages
Parameter xxx was copied to the copy buffer.
Parameter xxx was initialized.
Parameter xxx was pasted from the copy buffer.
The Monitor Define function allows a maximum of eight sources to be selected, but you attempted to
assign more than this.
This popup window cannot be bookmarked.
Failed to recall a scene memory or library.
You attempted to select a channel that cannot be operated due to your user level or some other reason.
Failed to store a scene memory or library.
You pressed the [UNDO] button when Undo was not available.
File on the USB memory could not be accessed for some reason.
File could not be saved from the USB memory.
Current user was changed to [xxx].
You attempted to delete a directory, but failed because there were files remaining in the directory.
CUE was defeated because you switched from the RACK screen to a different screen.
External HA data could not be recalled, because the state of connections to the external HA differs
from when the scene was stored.
The following operation has not been performed yet because the USB memory is being accessed.
The USB memory already contains a file/directory with the same name as the one you are attempting
to save, rename, or create.
Internal file access error
Overwriting was not possible because the file on the USB memory is write-protected.
Can't find HELP file.
The IP address or Gateway address setting is invalid.
Communication via the Network connector is not possible because the MAC address setting has been
damaged for some reason. Please contact your Yamaha dealer.
The USB memory could not be accessed because its format is invalid or unsupported.
KEY IN CUE was defeated because you switched from the DYNAMICS 1/2 popup window to a differ-
ent screen.
Loading from USB memory was aborted.
The backup battery voltage is low.
The number of songs that can be managed by the USB memory recorder has been exceeded.
All data has been initialized because the data in internal backup memory has been lost, due to failure
of the backup battery or some other reason. Please contact your Yamaha dealer.
An inappropriate signal is being input to the MIDI input port.
An inappropriate signal is being input to the MIDI input port.
Too much data is being received at the MIDI input port.
To much data is being transmitted from the MIDI output port.
In the RECORDER screen, it is not possible to move to a level higher than YPE/SONGS/.
Your operation has been ignored because there is no parameter that corresponds to the knob you
operated.
A section in the HELP data cannot be found.
No response from an external AD8HR.
The current screen or popup has been bookmarked.
The password has been changed.
Audio file link playback is not possible because recording is in progress.
The cooling fan of the internal power supply has stopped. If a malfunction has occurred, please con-
tact your Yamaha dealer.
Processing was interrupted.
Operation of the JPN button was cancelled because time is required for recorder processing.
Saving to the USB memory has been interrupted.
No data has been stored in the scene you attempted to recall, or the data has been damaged so that
it cannot be recalled.
You attempted to overwrite (store) a protected scene.
You attempted to overwrite (store) a read-only scene.
Meaning