Using The Monitor Function - Yamaha CL1 Reference Manual

Using the Monitor function

This section explains how to select the desired monitor source, and monitor it from the PHONES Out
jack or external monitor speakers.
1.
Connect your monitor system to the OMNI OUT jacks or 2TR OUT DIGITAL jack on
the rear panel.
Monitor signals can be sent to any desired output jack or output channel. To monitor through
headphones, make sure that your headphones are connected to the PHONES Out jack on the
front pad.
2.
In the Function Access Area, press the MONITOR button to access the MONITOR
screen.
In the MONITOR screen, the MONITOR field lets you check the current monitor settings, and
turn monitoring on or off.
The MONITOR screen contains the following items.
2 3
1
1
MONITOR popup display button
Enables you to access the MONITOR popup window, in which you can make detailed monitor
settings.
4 5
6
7
8
2
SOURCE SELECT field
Selects the monitor source. If DEFINE has been selected in this field, access the MONITOR
popup window to specify the source channel.
3
DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates monitor
signals.
• DIMMER LEVEL knob
Adjusts the amount by which the monitor signals will be attenuated when the dimmer is on.
• DIMMER ON button
Turn on this button to enable the dimmer and attenuate the monitor signal.
4
MONITOR FADER field
Enables you to set and view the monitor fader that adjusts the monitor level.
• MONITOR FADER LEVEL knob
Adjusts the monitor fader level. Pressing this knob will enable you to use the multifunction knob
in the Centralogic section to adjust the level.
• FADER ASSIGN display
This area displays the type of faders that are currently assigned to the monitor fader. Indicator
assignments are as follows:
• ---- ................................................ No assignment
• MASTER A................................. Master A only
• MASTER A+ .............................. Master A, Master B, Custom Fader bank
• MASTER B ................................. Master B only
• MASTER B+............................... Master B, Custom fader bank
• CUSTOM .................................... A single fader in the Custom fader bank
• CUSTOMs .................................. Multiple faders in the Custom fader bank
5
Meter field
Indicates the output level of Monitor Out channels L, R, and C. Press this field to open the
MONITOR popup window.
6
MONITOR OUTPUT button
Switches Monitor Out on or off.
7
PHONES LEVEL LINK button
If this is on, the MONITOR FADER LEVEL knob or MONITOR FADER will adjust the level of
signals sent to the PHONES Out jack.
8
MONO MONITOR button
Turn on this button to switch monitor signals to mono.
98
Monitor and Cue functions
Reference Manual