Network Status; Description Of Information In Network Status - Lucom lr77 v2 Configuration Manual

Item
TX
collisions
txqueuelen
RX bytes
TX bytes
You may view the status of the mobile network connection on the network status screen.
If the connection to the mobile network is active, it will appear in the system information as an
usb0 interface. The Route Table is displayed at the bottom.
For the XR5i v2 routers, interface ppp0 indicates the PPPoE connection.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Continued from previous page
Description
packets – transmit packets
errors – number of errors
dropped – dropped packets
overruns – outgoing packets lost because of overload
carrier – wrong outgoing packets with errors resulting from the
physical layer
Number of collisions on physical layer
Length of front network device
Total number of received bytes
Total number of transmitted bytes
Table 12: Description of Information in Network Status
Figure 5: Network Status
13
2. STATUS