Sending Sms; Send Sms On Ethernet Port1 Configuration - Lucom lr77 v2 Configuration Manual

Setting the parameters in the Enable AT-SMS protocol over TCP frame, you can enable
the router to send and receive SMS messages on a TCP port. This function requires you to
specify a TCP port number. The router sends SMS messages using a standard AT command.
Item
TCP Port

3.19.1 Sending SMS

If you establish a connection to the router using a serial interface or Ethernet, then you can
use AT commands to manage SMS messages. The following table lists only the commands
that the router supports. For other AT commands the router sends an OK response. The
router sends an ERROR response for complex AT commands.
AT Command
AT+CGMI
AT+CGMM
AT+CGMR
AT+CGPADDR
AT+CGSN
AT+CIMI
AT+CMGD
AT+CMGF
AT+CMGL
AT+CMGR
AT+CMGS
AT+CMGW
AT+CMSS
AT+COPS?
AT+CPIN
AT+CPMS
AT+CREG
AT+CSCA
AT+CSCS
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Description
TCP port on which will be allowed to send/receive SMS messages.
Table 64: Send SMS on ethernet PORT1 configuration
Description
Returns the specific identity of the manufacturer.
Returns the specific model identity of the manufacturer.
Returns the specific model revision identity of the manufacturer.
Displays the IP address of the usb0 interface.
Returns the product serial number.
Returns the International Mobile Subscriber Identity number (IMSI).
Deletes a message from the location.
Sets the presentation format for short messages.
Lists messages of a certain status from a message storage area.
Reads a message from a message storage area.
Sends a short message from the device to entered tel. number.
Writes a short message to the SIM storage.
Sends a short message from the SIM storage location.
Identifies the mobile networks available
Used to query and enter a PIN code.
Selects the SMS memory storage types, to be used for short message
operations.
Displays network registration status.
Sets the short message service center (SMSC) number
Selects the character set.
3. CONFIGURATION
Continued on next page
86