Lucom lr77 v2 Configuration Manual page 112

Module name
MODBUS TCP2RTU
Easy VPN client
NMAP
Daily Reboot
HTTP Authentication
BGP, RIP, OSPF
PIM SM
WMBUS Concentrator
pduSMS
GPS
Pinger
IS-IS
Attention: In some cases the firmware update can cause incompatibility with installed
user modules. Some of them are dependent on the version of the Linux kernel (for exam-
ple SmsBE and PoS Configuration). It is best to update user modules to the most recent
version.
Information about the user module and the firmware compatibility is at the beginning of the
user module's Application Note.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Description
Provides a conversion of MODBUS TCP/IP protocol to MDBUS
RTU protocol, which can be operated on the serial line.
Provides secure connection of LAN network behind our router
with LAN network behind CISCO router.
Enables TCP and UDP scan.
Enables daily reboot of the router at the specified time.
Adds the process of authentication to a server that doesn't pro-
vide this service.
Adds support of dynamic protocols.
Adds support of multicast routing protocol PIM-SM.
Enable the reception of messages from WMBUS meters and
saves contents of these messages to an XML file.
Sends short messages (SMS) to specified number.
Allows the router to provide location and time information in
all weather, anywhere on or near the Earth, where there is an
unobstructed line of sight to four or more GPS satellites.
Allows you to manually or automatically verify the functionallity
of the connection between two network interfaces (ping).
Adds support of IS-IS protocol.
Table 75: User modules
105
4. CUSTOMIZATION