Openvpn Configuration - Lucom lr77 v2 Configuration Manual

Item
Authenticate Mode
Pre-shared Secret
CA Certificate
DH Parameters
Local Certificate
Local Private Key
Username
Password
Extra Options
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Continued from previous page
Description
Specifies the authentication mode:
none – No authentication is set.
Pre-shared secret – Specifies the shared key function for
both sides of the tunnel.
Username/password – Specifies authentication using a
CA Certificate, Username and Password.
X.509 Certificate (multiclient) – Activates the X.509 au-
thentication in multi-client mode.
X.509 Certificate (client) – Activates the X.509 authenti-
cation in client mode.
X.509 Certificate (server) – Activates the X.509 authenti-
cation in server mode.
Specifies the pre-shared secret which you can use for every au-
thentication mode.
Specifies the CA Certificate which you can use for the user-
name/password and X.509 Certificate authentication modes.
Specifies the protocol for the DH parameters key exchange which
you can use for X.509 Certificate authentication in the server
mode.
Specifies the certificate used in the local device. You can use this
authentication certificate for the X.509 Certificate authentication
mode.
Specifies the key used in the local device. You can use the key
for the X.509 Certificate authentication mode.
Specifies a login name which you can use for authentication in
the username/password mode.
Specifies a password which you can use for authentication in the
username/password mode.
Specifies additional parameters for the OpenVPN tunnel, such as
DHCP options. The parameters are proceeded by two dashes.
For possible parameters see the help text in the router using SSH
– run the openvpnd --help command.
Table 37: OpenVPN Configuration
57
3. CONFIGURATION