Configuration Over Telnet - Lucom lr77 v2 Configuration Manual

6. Configuration over Telnet
Attention! The router cannot operate unless an activated SIM card has been inserted.
Monitoring of status, configuration and administration of the router can be performed over
the Telnet interface. The default IP address of the modem is 192.168.1.1. Configuration may
be performed only by the user "root" with initial password "root".
The following commands may be used to configure the router over Telnet:
Command
cat
cp
date
df
dmesg
echo
email
free
gsmat
gsminfo
gsmsms
hwclock
ifconfig
io
ip
iptables
kill
killall
ln
ls
mkdir
mv
ntpdate
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
6. CONFIGURATION OVER TELNET
Description
file contain write
copy of file
show/change of system time
displaying of informations about file system
displaying of kernel diagnostics messages
string write
Email send
displaying of informations about memory
sends AT commands (cdmaat for routers with CDMA module)
displaying of informations about signal quality
SMS send
displaying/change of time in RTC
displaying/change of interface configuration
reading/writing input/output pins
displaying/change of route table
displaying/modification of NetFilter rules
process kill
processes kill
link create
dump of directory contain
file create
file move
synchronization of system time with NTP server
Continued on next page
113