Smtp Configuration; Smtp Client Configuration Example; Smtp Client Configuration - Lucom lr77 v2 Configuration Manual

3.18 SMTP Configuration
You use the SMTP form to configure the Simple Mail Transfer Protocol client (SMTP) for
sending e-mails.
Item
SMTP Server Address
SMTP Port
Secure Method
Username
Password
Own E-mail Address
The mobile service provider can block other SMTP servers, then you can only use the SMTP
server of the service provider.
You send e-mails from the Startup script. The Startup Script dialog is located in the Con-
figuration section of the main menu. The router also allows you to send e-mails using an SSH
connection. Use the email command with the following parameters:
-t e-mail address of the receiver
-s subject, enter the subject in quotation marks
-m message, enter the subject in quotation marks
-a attachment file
-r number of attempts to send e-mail (default setting: 2)
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Description
IP or domain address of the mail server.
Port the SMTP server is listening on.
none, SSL/TLS, or STARTTLS. Secure method has to be sup-
ported by the SMTP server.
Name for the e-mail account.
Password for the e-mail account. The password can contain the
following special characters * + , - . / : = ? ! # % [ ] _ { } ~
The following special characters are not allowed: " $ & ' ( ) ; < >
Address of the sender.
Table 58: SMTP client configuration
Figure 53: SMTP Client Configuration Example
81
3. CONFIGURATION