Dyndns Configuration; Dyndns Configuration Example - Lucom lr77 v2 Configuration Manual

3.15 DynDNS Configuration
The DynDNS function allows you to access the router remotely using an easy to remem-
ber custom hostname. This DynDNS client monitors the IP address of the router and up-
dates the address whenever it changes. In order for DynDNS to function, you require a pub-
lic IP address, either static or dynamic, and an active Remote Access service account at
www.dyndns.org. Register the custom domain (third-level) and account information specified
in the configuration form. You can use other services, too – see the table below, Server item.
To open the DynDNS Configuration page, click DynDNS in the main menu.
Item
Hostname
Username
Password
Server
Example of the DynDNS client configuration with the domain conel.dyndns.org:
To access the router's configuration remotely, you will need to have enabled this option in the
NAT configuration (bottom part of the form), see chapter 3.9.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Description
The third order domain registered on the www.dyndns.org server.
Username for logging into the DynDNS server.
Password for logging into the DynDNS server.
Specifies a DynDNS service other than the www.dyndns.org. Possible
other services:
www.spdns.de
www.dnsdynamic.org
www.noip.com
Enter the update server service information in this field. If you leave this
field blank, the default server members.dyndns.org will be used.
Table 49: DynDNS Configuration
Figure 48: DynDNS Configuration Example
3. CONFIGURATION
73