Solutions Module Identification - Leroy-Somer digitax st User Manual

2.3.2 Main differences between DP-V0 and DP-V1
The main differences between DP-V0 and DP-V1 supported by SM-PROFIBUS DP-V1
are:
• PROFIdrive profile V4 support, which consists of
• Non-cyclic data channel access
2.4

Solutions Module identification

The SM-PROFIBUS DP-V1 can be identified by:
1. The label located on the underside of the Solutions Module.
2. The color coding across the front of the SM-PROFIBUS DP-V1 (purple).
Figure 2-4 SM-PROFIBUS DP-V1 labels
2.4.1 Date code format
The date code is split into two sections: a letter followed by a number.
The letter indicates the year, and the number indicates the week number (within the
year) in which the Solutions Module was built.
The letters go in alphabetical order, starting with A in 1991 (B in 1992, C in 1993 etc.).
Example:
A date code of R15 would correspond to week 15 of year 2008.
2.4.2 Unidrive SP: Backup / Auxiliary Supply
The Unidrive SP can be connected to a back-up power supply. This keeps the control
electronics and Solutions Module powered up, allowing the SM-PROFIBUS DP-V1 to
continue communicating with the PROFIBUS DP-V1 master controller when the main
supply to the Unidrive SP is switched off. For every SM-PROFIBUS DP-V1 fitted allow
for an extra 70mA of supply current to be drawn from the backup supply.
This feature is only available on the Unidrive SP.
NOTE
SM-PROFIBUS DP-V1 User Guide
Issue : a
• Standard Telegram 1
• PROFIdrive PNU Access
• Drive Identification
• Fault Buffer
• Identification and Maintenance Functions
Solutions Module
name
SM-PROFIBUS DP-V1
Issue: 2.00
Hardware
issue
Ser No : 3000005001
number
www.leroy-somer.com
Customer
and date code
STDJ41
Serial number
11