Table of Contents
Advertisement
5
Getting started
This section is intended to provide a generic guide for setting up SM-PROFIBUS DP-V1
and a master controller. Figure 5-1 is intended as a guide only and is provided to detail
the stages that are required to achieve a functioning network. It is recommended that all
of this chapter is read, before attempting to configure a system.
Due to the large number of PLCs/masters that support PROFIBUS-DP only generic
NOTE
details can be provided. Support is available through your supplier or LEROY-SOMER.
Before contacting your supplier or LEROY-SOMER for support ensure you have read
NOTE
Chapter 10 on page 53 of this manual and check you have configured all parameters
correctly.
Ensure the following information is available before calling:
•
A list of all parameters in SM-PROFIBUS DP-V1.
•
The drive firmware version (see the relevant drive user guide).
•
The SM-Profibus DP-V1 firmware version.
5.1
Conventions used in this guide
The configuration of the host drive and Solutions Module is done using menus and
parameters. A menu is a logical collection of parameters that have similar functionality.
In the case of a Solutions Module, the parameters will appear in menu 15 for the
Digidrive SK, and in menu 15, 16, or 17 for the Unidrive SP, Affinity, Mentor MP and
Digitax ST depending on the slot the module is fitted in to.
The menu is determined by the number before the decimal point and the parameter by
the number following the decimal point.
The method used to determine the menu or parameter is as follows:
•
Pr MM.xx - Menu corresponding to the Solution Module and any parameter.
•
Pr xx.00 - signifies parameter number 00 in any menu.
5.2
Minimum software versions required
Table 5.1 Minimum software versions required for use with SM-PROFIBUS
Product
Unidrive SP
Affinity
Digitax ST
Digidrive SK
Mentor MP
16
Software Version
V01.06.00 or later
V01.00.00 or later
V01.00.00 or later
V01.06.00 or later
V01.02.00 or later
www.leroy-somer.com
SM-PROFIBUS Version
V01.00.00 or later
V03.00.00 or later
V03.00.00 or later
V03.00.00 or later
V03.02.00 or later
SM-PROFIBUS DP-V1 User Guide
Issue : a
Hide quick links:
Advertisement
Table of Contents
