Leroy-Somer digitax st User Manual page 2

General Information
The manufacturer accepts no liability for any consequences resulting from inappropriate,
negligent or incorrect installation or adjustment of the optional parameters of the equipment or
from mismatching the variable speed drive with the motor.
The contents of this guide are believed to be correct at the time of printing. In the interests of
commitment to a policy of continuous development and improvement, the manufacturer
reserves the right to change the specification of the product or its performance, or the content
of the guide without notice.
All rights reserved. No parts of this guide may be reproduced or transmitted in any form or by
any means, electrical or mechanical including, photocopying, recording or by an information
storage or retrieval system, without permission in writing from the publisher.
Environmental Statement
LEROY-SOMER is committed to minimising the environmental impacts of its manufacturing
operations and of its products throughout their life cycle. To this end, we operate an
Environmental Management System (EMS) which is certified to the International Standard ISO
14001.
The electronic variable speed drives manufactured by LEROY-SOMER have the potential to
save energy and (through increased machine/process efficiency) reduce raw material
consumption and scrap throughout their long working lifetime. In typical applications, these
positive environmental effects far outweigh the negative impacts of product manufacture and
end-of-life disposal.
Nevertheless, when the products eventually reach the end of their useful life, they must not be
discarded but should instead be recycled by a specialist recycler of electronic equipment.
Recyclers will find the products easy to dismantle into their major component parts for efficient
recycling. Many parts snap together and can be separated without the use of tools, whilst other
parts are secured with conventional fasteners. Virtually all parts of the product are suitable for
recycling.
Product packaging is of good quality and can be re-used. Large products are packed in wooden
crates, while smaller products come in strong cardboard cartons which themselves have a high-
recycled fibre content. If not re-used, these containers can be recycled. Polythene, used on the
protective film and bags from wrapping product, can be recycled in the same way. LEROY-
SOMER' packaging strategy prefers easily recyclable materials of low environmental impact,
and regular reviews identify opportunities for improvement.
When preparing to recycle or dispose of any product or packaging, please observe local
legislation and best practice.
Software Statement
This Solutions Module (SM) is supplied with the latest software version. When retro-fitting to an
existing system, all software versions should be verified to confirm the same functionality as
Solutions Modules of the same type already present. This also applies to products returned from
LEROY-SOMER. If there is any doubt please contact the supplier of the product.
The software version of the Solutions Module can be identified by looking at Pr MM.02 and Pr
MM.51, where MM is the relevant menu number for the Solutions Module slot being used.
See Pr MM.02 and Pr MM.51 description later in this manual for more information.
The software version takes the form of xx.yy.zz, where Pr MM.02 displays xx.yy and Pr MM.51
displays zz (e.g. for software version 01.01.00 Pr MM.02 will display 1.01 and Pr MM.51 will
display 0).
REACH legislation
EC Regulation 1907/2006 on the Registration, Evaluation, Authorisation and restriction of
Chemicals (REACH) requires the supplier of an article to inform the recipient if it contains more
than a specified proportion of any substance which is considered by the European Chemicals
Agency (ECHA) to be a Substance of Very High Concern (SVHC) and is therefore listed by them
as a candidate for compulsory authorisation.
For current information on how this requirement applies in relation to specific LEROY-SOMER
products, please approach your usual contact in the first instance.
Issue Number : 9