Anritsu Spectrum Master MS2711D Programming Manual page 138

1.29 1/20/04
1.30 1/22/04
1.31 1/23/04
1.32 2/4/04
1.33 2/23/04
1.34 2/26/04
1.35 3/5/04
1.36 3/11/04
1.37 3/18/04
1.38 3/19/04
137
Fixed numbering on #65. Added marker
type to #29, 33, 36, 65 and 66. Added zero
status and zero value to #29, 65 and 66.
Added channel power, ACPR and IA
parameters to #65 and 66. Added external
reference frequency status, view b status, IA
status and C/I status to #65 and 66.
Both log and linear units must be sent and
received, regardless of which scale type is
selected (#65 and 66). This required moving
the bit that represents the external reference
frequency status. Added trace B id to #65
and 66. Added format of PM offset to #65
and 66.
Added Write Protect Setup #71.
Merge changes from S33xD PM:
Add T1E1 Read Frequency, Set T1E1
Frequency Cal, and Read T1E1 Frequency
Cal commands (A017, A018, A019).
Added Set Filter Linearity Cal Values –
Control Word (BB01h).
Add T1/E1 Vpp, dBdsx and Frequency
to commands 33 and 36.
Added Appendix A : BSL Serial
Commands.
Added DMB to SPA signal standard table.
Added #72 Clear Setup Memory Locations
Added noise marker conversion to #117.
Fixed numbering on AA15h.
Modifications to #67 (Parameter Limits).
Removed default setup from #65. Need
unproven.
Added attributes, cal status to #68 (query
saved setups).
Added error to ref level cal #104
Fixed impedance adapter indices in #29, #33
and #36.
Jennifer Burns
Jennifer Burns
Jennifer Burns
Jennifer Burns
Jennifer Burns
Jennifer Burns
Jennifer Burns
Jennifer Burns
Derek Truesdale
Jennifer Burns