Amprolyzer (Add-On Product) - Siemens PCS 7 Service Manual

Diagnostics in PCS 7
7.18 Diagnostic tools
Overview
The components and tools listed below are not part of PCS 7 and are used for advanced testing
and diagnostics. Below you will find some of the diagnostics applications suitable for PCS 7:
● Amprolyzer (add-on product) (Page 116)
● BANY (add-on product) (Page 117)
● BT 200 bus test device (Page 119)
● SYSTEM Process Control Diagnostics (add-on product) (Page 119)
7.18.8.2

Amprolyzer (add-on product)

Introduction
Amprolyzer is a program that allows you to perform simple, thorough diagnostics for
PROFIBUS.
Calling
If you have installed Amprolyzer, call the program with the Start menu Programs >
Amprolyzer.
Overview
Topic
System
configuration
Message
frame traffic
Bus recording Parallel recording of
Interface to
data
evaluation
116
Detailed information
Comparison of target/
actual configuration,
lifebeat monitoring
Interpretation, statistics,
detection/triggering of
frame errors and repeats
multiple busses at the
same time, special
triggers, filters
Open interface using MS
Excel
Called via
Addition of a new bus using the
"Add Bus" button.
Display of all bus information using
the "Show Bus State" button.
1. Without filters/triggers:
As above
2. With filters/triggers:
Record Complex" button
Message frame traffic is recorded
here, in addition to a display of all
bus information.
As above
Recorded data are automatically
exported and displayed in MS Excel.
A recording can be sent as an Excel
file, so that the recipient does not
have to have this tool.
Service support and diagnostics (V8.0)
Service Manual, 03/2012, A5E02779775-02
Additional
information
Manual in PDF
format
Manual in PDF
format
Manual in PDF
format
Manual in PDF
format